SWT之FormData布局.docx
- 文档编号:9624521
- 上传时间:2023-02-05
- 格式:DOCX
- 页数:11
- 大小:29.91KB
SWT之FormData布局.docx
《SWT之FormData布局.docx》由会员分享,可在线阅读,更多相关《SWT之FormData布局.docx(11页珍藏版)》请在冰豆网上搜索。
SWT之FormData布局
SWT之FormAttachment
转自:
像其它的layout类一样,FormLayout用的data类是:
FormData。
FormData用另外一个类来控制窗口小部件的大小和位置:
FormAttachment.一个FormData最多用4个FormAttachment,它们分别对应这个小部件的4个面:
顶部,底部,左边和右边。
FormAttachment定义了小部件在parentcomposite或是这个composite里其它部件的位置。
FormAttachment计算位置和大小的方法:
y=ax+b
在这个等式中,在数学上y代表的是纵坐标,x是横坐标值.a是斜率,b是偏移量.按照FormAttachment的规则,y是高,x是宽度,a是一个相对其它部件的百分率,b是偏移量.FormAttachment实例中的每个数据成员分别代表这些值.
以下(表一)是FormAttachment的数据成员表和相应的意思:
表一:
FormAttachment数据成员
Attribute
Description
intalignment
指定是以另外一个部件的哪一边为基准的.可能的值是:
SWT.TOP,SWT.CENTER,和SWT.BOTTOM.默认是以最近的一边为基准.
Controlcontrol
指定FormAttachment是以哪个部件为参照物.
intdenominator
指定分母.默认值为100
intnumerator
指定分子
intoffset
指定离composite边界或部件的边界的偏移量.单位是象素.
FormAttachment拥有5个构造函数,没有一个是空的,它们如下表(表二)所示:
表二:
FormAttachment的构造函数:
Constructor
Description
FormAttachment(Controlcontrol)
以另外的某个部件为参照物.
FormAttachment(Controlcontrol,intoffset)
以另外的某个部件为参照物,加上偏移量.
FormAttachment(Controlcontrol,intoffset,intalignment)
以另外的某个部件为参照物,加上偏移量和alignment
FormAttachment(intnumerator)
设定分子.分母为100,没有偏移量
FormAttachment(intnumerator,intoffset)
指定分子和偏移量和100的分母
FormAttachment(intnumerator,intdenominator,intoffset)
特定的分子,分母,偏移量
FormData最多包含4个FormAttachment实例,每个对应了与它联系的部件的一边.另外,FormData也可以指定宽和高.表四列出了FormData的数据成员:
Attribute
Description
FormAttachmentbottom
TheFormAttachmentcorrespondingtothebottomsideofthecontrol.
这个FormAttachment用来指定部件的底部位置
intheight
这个部件的高度.单位为象素.
FormAttachmentleft
这个FormAttachment用来指定部件的左部位置
FormAttachmentright
这个FormAttachment用来指定部件的右部位置
FormAttachmenttop
这个FormAttachment用来指定部件的顶部位置
intwidth
这个部件的宽度.单位为象素.
当你生成一个FormData对象,你可以自己传给它宽和高的值.如果你没有指定FormAttachment对象,部件会自动以parentcomposite的上边界和左边为起始边界.如果你这样定义了多个部件,它们会都在composite的左上角.
FormLayout有两个数据成员marginHeight和marginWidth,用来以象素为单位来指定大小.它们用来指定包围composite里所有内容的空白.marginHeight对应的是顶部和底部的空白大小,marginWidth对应的是左边和右边的空白大小.空白的默认值是0.
以上的话如果你看得不大懂也没有关系,我们按照具体的例子来看就知道了.
用到FormLayout的最简单的例子就是一个窗口里一个按钮,并且不用FormData.
importorg.eclipse.swt.SWT;
importorg.eclipse.swt.layout.FormLayout;
importorg.eclipse.swt.widgets.Button;
importorg.eclipse.swt.widgets.Display;
importorg.eclipse.swt.widgets.Shell;
publicclassTestFormLayout{
publicstaticvoidmain(String[]args){
Displaydisplay=newDisplay();
Shellshell=newShell(display);
shell.setLayout(newFormLayout());
newButton(shell,SWT.PUSH).setText("Button");
shell.pack();
shell.open();
while(!
shell.isDisposed()){
if(!
display.readAndDispatch()){
display.sleep();
}
}
display.dispose();
}
}
通过上述代码我们可以简单的在一个shell上设置一个button,并且button距离整个界面的其他的边界距离为0。
我们可以通过设定marginHeight和marginWidth值改变周围的空白,即距离边界的距离.
代码象这样:
FormLayoutlayout=newFormLayout();
layout.marginHeight=5;
layout.marginWidth=10;
shell.setLayout(layout);
但是,只有用FormData和FormAttachment你才能做更多的事.
试着使用FormData,但是不用FormAttachments,FormData有公共成员属性height和width用来改变按钮的大小.
Buttonbutton=newButton(shell,SWT.PUSH);
button.setText("Button");
FormDatadata=newFormData();
data.height=50;
data.width=50;
button.setLayoutData(data);
按钮在窗口中的位置是静态的,也就是说改变窗口的大小不影响按钮的位置.
我们举个例子,比如说,你希望这个按钮始终离窗口的右边界50个象素的话,你必须在你刚刚产生的FormData上添加一个FormAttachment.
因为你现在要指定这个按钮的右边的具体情况了.所以你现在要设置FormData的right属性,
还记得FormData的right属性是一个FormAttachment对象吧.
当与parentcomposite产生联系时,如果是顶部和左边的话,分子设置为0,如果是顶部和右边的话,分子设置为100,分别代表了0%和100%.可以在构造函数中设置分子.我们现在把分子设置为100,偏移量设置为-50.
我们不需要设置分母,因为它的默认大小是100.代码象这样:
data.right=newFormAttachment(100,-50);
现在编译并运行程序,按钮离右边刚好50个象素.缩小窗口也不会有任何影响,按钮离右边始终是50象素.
现在按钮总是维持它离右边50个象素,
但是我们需要它始终保持位置不变,并且随着窗口的伸缩而伸缩.要实现这个要求,我们必须设置它的左边,
所以可以这样实现:
data.left=newFormAttachment(0,10);
把分子的值设置为0表示它是以窗口的最左边来计算偏移量的.
偏移量设置为10表示它始终离窗口最左边10个象素.
重新编译运行程序,初始界面好象和刚刚差不多,
但是改变窗口大小就可以看到按钮离窗口左边的大小始终没有改变.
离左边和离右边的值已经设置好了,所以它的宽度自然也定下来了,我们可以把原来FormData设置的按钮宽度那行代码删掉了.
现在有点熟悉了吧,现在我们把按钮联系到窗口的顶部和底部.我们可以把它放到离窗口顶部25%的距离.我们可以简单的表示为1/4,而不是0.25让分母保持为默认值(这样也可以).我们把偏移量设置为0.加上这句代码:
data.top=newFormAttachment(1,4,0);
现在按钮保持与顶部1/4的距离了.无论怎么改变窗口大小都是1/4。
让我们在这个按钮下面再添加一个按钮.我们把这个按钮布置在现在的按钮下面,添加按钮的顶部在现在的按钮的底部下面5个象素.并且左边和右边分别和现在的按钮对齐.从下面的代码开始:
Buttonbutton2=newButton(shell,SWT.PUSH);
button2.setText("Button2");
然后我们产生一个FormData对象,设置它的bottom成员.我们把分子设置为0,偏移量为0。
data=newFormData();
button2.setLayoutData(data);
data.bottom=newFormAttachment(100,0);
为了以现在的按钮为标准来算偏移量,我们只需要把第一个按钮传个FormAttachment的构造函数就可以了,那么现在就不是以窗口边界来计算,而是以传递给它的按钮来计算了.
我们要把这个按钮加到以有按钮的下面5个象素处,所以偏移量是5.
data.top=newFormAttachment(button,5);
我们不需要设置为以按钮的底部为界,因为默认情况下,边界被自动设是离这个按钮最近的边界.
因为我们指定的FormAttachment是用来指定新按钮的顶部的,而且新按钮是在第一个按钮后面加上去的,新按钮离第一个按钮的地方最近的就是底部.
你可能就用同样的构造函数来设置新按钮的左边界,甚至就用只需要一个Control对象的构造函数,因为偏移量是0.象这样:
data.left=newFormAttachment(button);
但是这句代码是以第一个按钮的右边为基准来计算的,如上图所示:
因为新添加的按钮左边离第一个按钮最近的边界是它的右边.
所以我们必须清楚地指定按第一个按钮的左边界为基准.
只需要传给构造函数SWT.LEFT值给FromData对象的alignment成员:
data.left=newFormAttachment(button,0,SWT.LEFT);
我们同样的方法设置新按钮的右边,完成任务.
data.right=newFormAttachment(button,0,SWT.RIGHT);
完整的代码如下:
importorg.eclipse.swt.widgets.*;
importorg.eclipse.swt.layout.FormAttachment;
importorg.eclipse.swt.layout.FormData;
importorg.eclipse.swt.layout.FormLayout;
importorg.eclipse.swt.SWT;
publicclassFormLayoutFormAttachment{
publicstaticvoidmain(String[]args){
Displaydisplay=newDisplay();
Shellshell=newShell(display);
FormLayoutlayout=newFormLayout();
layout.marginHeight=5;
layout.marginWidth=10;
shell.setLayout(layout);
Buttonbutton=newButton(shell,SWT.PUSH);
button.setText("Button");
FormDatadata=newFormData();
data.height=50;
data.right=newFormAttachment(100,-50);
data.left=newFormAttachment(0,10);
data.top=newFormAttachment(1,4,0);
button.setLayoutData(data);
Buttonbutton2=newButton(shell,SWT.PUSH);
button2.setText("Button2");
data=newFormData();
button2.setLayoutData(data);
data.bottom=newFormAttachment(100,0);
data.top=newFormAttachment(button,5);
data.left=newFormAttachment(button,0,SWT.LEFT);
data.right=newFormAttachment(button,0,SWT.RIGHT);
shell.pack();
shell.open();
while(!
shell.isDisposed()){
if(!
display.readAndDispatch()){
display.sleep();
}
}
display.dispose();
}
}
下面写一个更加复杂的程序,代码如下:
我就不多解释了,应该都看得懂,运行结果出来后,
无论怎么改变窗口的大小,所有按钮的位置都没有改变.
importorg.eclipse.swt.SWT;
importorg.eclipse.swt.layout.FormAttachment;
importorg.eclipse.swt.layout.FormData;
importorg.eclipse.swt.layout.FormLayout;
importorg.eclipse.swt.widgets.Button;
importorg.eclipse.swt.widgets.Display;
importorg.eclipse.swt.widgets.Shell;
publicclassTestFormLayout{
publicstaticvoidmain(String[]args){
Displaydisplay=newDisplay();
Shellshell=newShell(display);
FormLayoutlayout=newFormLayout();
layout.marginHeight=5;
layout.marginWidth=10;
shell.setLayout(layout);
Buttonbutton=newButton(shell,SWT.PUSH);
button.setText("Button");
FormDatadata=newFormData();
data.height=50;
data.right=newFormAttachment(100,-50);
data.left=newFormAttachment(0,10);
data.top=newFormAttachment(1,4,0);
button.setLayoutData(data);
Buttonbutton2=newButton(shell,SWT.PUSH);
button2.setText("Button2");
data=newFormData();
button2.setLayoutData(data);
data.bottom=newFormAttachment(100,0);
data.top=newFormAttachment(button,5);
data.left=newFormAttachment(button,0,SWT.LEFT);
data.right=newFormAttachment(button,0,SWT.RIGHT);
shell.pack();
shell.open();
while(!
shell.isDisposed()){
if(!
display.readAndDispatch()){
display.sleep();
}
}
display.dispose();
}
}
下面写一个更加复杂的程序,代码如下:
运行结果出来后,无论怎么改变窗口的大小,所有按钮的位置都没有改变.
importorg.eclipse.swt.SWT;
importorg.eclipse.swt.layout.FormAttachment;
importorg.eclipse.swt.layout.FormData;
importorg.eclipse.swt.layout.FormLayout;
importorg.eclipse.swt.layout.GridData;
importorg.eclipse.swt.layout.GridLayout;
importorg.eclipse.swt.widgets.Button;
importorg.eclipse.swt.widgets.Composite;
importorg.eclipse.swt.widgets.Display;
importorg.eclipse.swt.widgets.Shell;
publicclassFormLayoutComplex{
publicstaticvoidmain(String[]args){
Displaydisplay=newDisplay();
Shellshell=newShell(display);
FormLayoutlayout=newFormLayout();
shell.setLayout(layout);
Buttonone=newButton(shell,SWT.PUSH);
one.setText("One");
FormDatadata=newFormData();
data.top=newFormAttachment(0,5);
data.left=newFormAttachment(0,5);
data.bottom=newFormAttachment(50,-5);
data.right=newFormAttachment(50,-5);
one.setLayoutData(data);
Compositecomposite=newComposite(shell,SWT.NONE);
GridLayoutgridLayout=newGridLayout();
gridLayout.marginHeight=0;
gridLayout.marginWidth=0;
composite.setLayout(gridLayout);
Buttontwo=newButton(composite,SWT.PUSH);
two.setText("two");
GridDatagridData=newGridData(GridData.FILL_BOTH);
two.setLayoutData(gridData);
Buttonthree=newButton(composite,SWT.PUSH);
three.setText("three");
gridData=newGridData(GridData.FILL_BOTH);
three.setLayoutData(gridData);
Buttonfour=newButton(composite,SWT.PUSH);
four.setText("four");
gridData=newGridData(GridData.FILL_BOTH);
four.setLayoutData(gridData);
data=newFormData();
data.top=newFormAttachment(0,5);
data.left=newFormAttachment(one,5);
data.bottom=newFormAttachment(50,-5);
data.right=newFormAttachment(100,-5);
composite.setLayoutData(data);
Buttonfive=newButton(shell,SWT.PUSH);
five.setText("five");
data=newFormData();
data.top=newFormAttachment(one,5)
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- SWT FormData 布局