linux中的find命令参数详解.docx
- 文档编号:6451549
- 上传时间:2023-01-06
- 格式:DOCX
- 页数:11
- 大小:18.01KB
linux中的find命令参数详解.docx
《linux中的find命令参数详解.docx》由会员分享,可在线阅读,更多相关《linux中的find命令参数详解.docx(11页珍藏版)》请在冰豆网上搜索。
linux中的find命令参数详解
linux中的find命令参数详解
Linux中的find命令包括了很多的参数选项,下面由小编为大家整理了linux中的find命令参数的相关知识,希望对大家有帮助!
linux中的find命令参数详解
find命令参数1.使用name选项
文件名选项是find命令最常用的选项,要么单独使用该选项,要么和其他选项一起使用。
可以使用某种文件名模式来匹配文件,记住要用引号将文件名模式引起来。
不管当前路径是什么,如果想要在自己的根目录$HOME中查找文件名符合*.log的文件,使用~作为'pathname'参数,波浪号~代表了你的$HOME目录。
find~-name"*.log"-print
想要在当前目录及子目录中查找所有的‘*.log‘文件,可以用:
find.-name"*.log"-print
想要的当前目录及子目录中查找文件名以一个大写字母开头的文件,可以用:
find.-name"[A-Z]*"-print
想要在/etc目录中查找文件名以host开头的文件,可以用:
find/etc-name"host*"-print
想要查找$HOME目录中的文件,可以用:
find~-name"*"-print或find.-print
要想让系统高负荷运行,就从根目录开始查找所有的文件。
find/-name"*"-print
如果想在当前目录查找文件名以一个个小写字母开头,最后是4到9加上.log结束的文件:
命令:
find.-name"[a-z]*[4-9].log"-print
输出:
[root@localhosttest]#ll
总计316
-rw-r--r--1rootroot30210811-1306:
03log2012.log
-rw-r--r--1rootroot6111-1306:
03log2013.log
-rw-r--r--1rootroot011-1306:
03log2014.log
-rw-r--r--1rootroot011-1306:
06log2015.log
drwxr-xr-x6rootroot409610-2701:
58scf
drwxrwxr-x2rootroot409611-1306:
08test3
drwxrwxr-x2rootroot409611-1305:
50test4
[root@localhosttest]#find.-name"[a-z]*[4-9].log"-print
./log2014.log
./log2015.log
./test4/log2014.log
[root@localhosttest]#
find命令参数2.用perm选项
按照文件权限模式用-perm选项,按文件权限模式来查找文件的话。
最好使用八进制的权限表示法。
如在当前目录下查找文件权限位为755的文件,即文件属主可以读、写、执行,其他用户可以读、执行的文件,可以用:
[root@localhosttest]#find.-perm755-print
.
./scf
./scf/lib
./scf/service
./scf/service/deploy
./scf/service/deploy/product
./scf/service/deploy/info
./scf/doc
./scf/bin
[root@localhosttest]#
还有一种表达方法:
在八进制数字前面要加一个横杠-,表示都匹配,如-007就相当于777,-005相当于555,
命令:
find.-perm-005
输出:
[root@localhosttest]#ll
总计316
-rw-r--r--1rootroot30210811-1306:
03log2012.log
-rw-r--r--1rootroot6111-1306:
03log2013.log
-rw-r--r--1rootroot011-1306:
03log2014.log
-rw-r--r--1rootroot011-1306:
06log2015.log
drwxr-xr-x6rootroot409610-2701:
58scf
drwxrwxr-x2rootroot409611-1306:
08test3
drwxrwxr-x2rootroot409611-1305:
50test4
[root@localhosttest]#find.-perm-005
.
./test4
./scf
./scf/lib
./scf/service
./scf/service/deploy
./scf/service/deploy/product
./scf/service/deploy/info
./scf/doc
./scf/bin
./test3
[root@localhosttest]#
find命令参数3.忽略某个目录
如果在查找文件时希望忽略某个目录,因为你知道那个目录中没有你所要查找的文件,那么可以使用-prune选项来指出需要忽略的目录。
在使用-prune选项时要当心,因为如果你同时使用了-depth选项,那么-prune选项就会被find命令忽略。
如果希望在test目录下查找文件,但不希望在test/test3目录下查找,可以用:
命令:
findtest-path"test/test3"-prune-o-print
输出:
[root@localhostsoft]#findtest-path"test/test3"-prune-o-print
test
test/log2014.log
test/log2015.log
test/test4
test/test4/log2014.log
test/test4/log2013.log
test/test4/log2012.log
test/scf
test/scf/lib
test/scf/service
test/scf/service/deploy
test/scf/service/deploy/product
test/scf/service/deploy/info
test/scf/doc
test/scf/bin
test/log2013.log
test/log2012.log
[root@localhostsoft]#
find命令参数4.使用find查找文件的时候怎么避开某个文件目录
实例1:
在test目录下查找不在test4子目录之内的所有文件
命令:
findtest-path"test/test4"-prune-o-print
输出:
[root@localhostsoft]#findtest
test
test/log2014.log
test/log2015.log
test/test4
test/test4/log2014.log
test/test4/log2013.log
test/test4/log2012.log
test/scf
test/scf/lib
test/scf/service
test/scf/service/deploy
test/scf/service/deploy/product
test/scf/service/deploy/info
test/scf/doc
test/scf/bin
test/log2013.log
test/log2012.log
test/test3
[root@localhostsoft]#findtest-path"test/test4"-prune-o-print
test
test/log2014.log
test/log2015.log
test/scf
test/scf/lib
test/scf/service
test/scf/service/deploy
test/scf/service/deploy/product
test/scf/service/deploy/info
test/scf/doc
test/scf/bin
test/log2013.log
test/log2012.log
test/test3
[root@localhostsoft]#
说明:
find[-path..][expression]
在路径列表的后面的是表达式
-path"test"-prune-o-print是-path"test"-a-prune-o-print的简写表达式按顺序求值,-a和-o都是短路求值,与shell的&&和||类似如果
-path"test"为真,则求值-prune,-prune返回真,与逻辑表达式为真;否则不求值-prune,与逻辑表达式为假。
如果-path"test"-a-prune为假,则求值-print,-print返回真,或逻辑表达式为真;否则不求值-print,或逻辑表达式为真。
这个表达式组合特例可以用伪码写为:
if-path"test"then
-prune
else
实例2:
避开多个文件夹:
命令:
findtest\(-pathtest/test4-o-pathtest/test3\)-prune-o-print
输出:
[root@localhostsoft]#findtest\(-pathtest/test4-o-pathtest/test3\)-prune-o-print
test
test/log2014.log
test/log2015.log
test/scf
test/scf/lib
test/scf/service
test/scf/service/deploy
test/scf/service/deploy/product
test/scf/service/deploy/info
test/scf/doc
test/scf/bin
test/log2013.log
test/log2012.log
[root@localhostsoft]#
说明:
圆括号表示表达式的结合。
\表示引用,即指示shell不对后面的字符作特殊解释,而留给find命令去解释其意义。
实例3:
查找某一确定文件,-name等选项加在-o之后
命令:
findtest\(-pathtest/test4-o-pathtest/test3\)-prune-o-name"*.log"-print
输出:
[root@localhostsoft]#findtest\(-pathtest/test4-o-pathtest/test3\)-prune-o-name"*.log"-print
test/log2014.log
test/log2015.log
test/log2013.log
test/log2012.log
[root@localhostsoft]#
find命令参数5.使用user和nouser选项
按文件属主查找文件:
实例1:
在$HOME目录中查找文件属主为peida的文件
命令:
find~-userpeida-print
实例2:
在/etc目录下查找文件属主为peida的文件:
命令:
find/etc-userpeida-print
说明:
实例3:
为了查找属主帐户已经被删除的文件,可以使用-nouser选项。
在/home目录下查找所有的这类文件
命令:
find/home-nouser-print
说明:
这样就能够找到那些属主在/etc/passwd文件中没有有效帐户的文件。
在使用-nouser选项时,不必给出用户名;find命令能够为你完成相应的工作。
find命令参数6.使用group和nogroup选项
就像user和nouser选项一样,针对文件所属于的用户组,find命令也具有同样的选项,为了在/apps目录下查找属于gem用户组的文件,可以用:
find/apps-groupgem-print
要查找没有有效所属用户组的所有文件,可以使用nogroup选项。
下面的find命令从文件系统的根目录处查找这样的文件:
find/-nogroup-print
find命令参数7.按照更改时间或访问时间等查找文件
如果希望按照更改时间来查找文件,可以使用mtime,atime或ctime选项。
如果系统突然没有可用空间了,很有可能某一个文件的长度在此期间增长迅速,这时就可以用mtime选项来查找这样的文件。
用减号-来限定更改时间在距今n日以内的文件,而用加号+来限定更改时间在距今n日以前的文件。
希望在系统根目录下查找更改时间在5日以内的文件,可以用:
find/-mtime-5-print
为了在/var/adm目录下查找更改时间在3日以前的文件,可以用:
find/var/adm-mtime+3-print
find命令参数8.查找比某个文件新或旧的文件
如果希望查找更改时间比某个文件新但比另一个文件旧的所有文件,可以使用-newer选项。
它的一般形式为:
newest_file_name!
oldest_file_name
其中,!
是逻辑非符号。
实例1:
查找更改时间比文件log2012.log新但比文件log2017.log旧的文件
命令:
find-newerlog2012.log!
-newerlog2017.log
输出:
[root@localhosttest]#ll
总计316
-rw-r--r--1rootroot30210811-1306:
03log2012.log
-rw-r--r--1rootroot6111-1306:
03log2013.log
-rw-r--r--1rootroot011-1306:
03log2014.log
-rw-r--r--1rootroot011-1306:
06log2015.log
-rw-r--r--1rootroot011-1614:
41log2016.log
-rw-r--r--1rootroot011-1614:
43log2017.log
drwxr-xr-x6rootroot409610-2701:
58scf
drwxrwxr-x2rootroot409611-1306:
08test3
drwxrwxr-x2rootroot409611-1305:
50test4
[root@localhosttest]#find-newerlog2012.log!
-newerlog2017.log
.
./log2015.log
./log2017.log
./log2016.log
./test3
[root@localhosttest]#
实例2:
查找更改时间在比log2012.log文件新的文件
命令:
find.-newerlog2012.log-print
输出:
[root@localhosttest]#find-newerlog2012.log
.
./log2015.log
./log2017.log
./log2016.log
./test3
[root@localhosttest]#
find命令参数9.使用type选项
实例1:
在/etc目录下查找所有的目录
命令:
find/etc-typed-print
实例2:
在当前目录下查找除目录以外的所有类型的文件
命令:
find.!
-typed-print
实例3:
在/etc目录下查找所有的符号链接文件
命令:
find/etc-typel-print
find命令参数10.使用size选项
可以按照文件长度来查找文件,这里所指的文件长度既可以用块(block)来计量,也可以用字节来计量。
以字节计量文件长度的表达形式为Nc;以块计量文件长度只用数字表示即可。
在按照文件长度查找文件时,一般使用这种以字节表示的文件长度,在查看文件系统的大小,因为这时使用块来计量更容易转换。
实例1:
在当前目录下查找文件长度大于1M字节的文件
命令:
find.-size+1000000c-print
实例2:
在/home/apache目录下查找文件长度恰好为100字节的文件:
命令:
find/home/apache-size100c-print
实例3:
在当前目录下查找长度超过10块的文件(一块等于512字节)
命令:
find.-size+10-print
find命令参数11.使用depth选项
在使用find命令时,可能希望先匹配所有的文件,再在子目录中查找。
使用depth选项就可以使find命令这样做。
这样做的一个原因就是,当在使用find命令向磁带上备份文件系统时,希望首先备份所有的文件,其次再备份子目录中的文件。
实例1:
find命令从文件系统的根目录开始,查找一个名为CON.FILE的文件。
命令:
find/-name"CON.FILE"-depth-print
说明:
它将首先匹配所有的文件然后再进入子目录中查找
find命令参数12.使用mount选项
在当前的文件系统中查找文件(不进入其他文件系统),可以使用find命令的mount选项。
实例1:
从当前目录开始查找位于本文件系统中文件名以XC结尾的文件
命令:
find.-name"*.XC"-mount-print
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- linux 中的 find 命令 参数 详解