大型游乐设施验收需办理的相关法定程序.docx
- 文档编号:27691642
- 上传时间:2023-07-04
- 格式:DOCX
- 页数:28
- 大小:69.46KB
大型游乐设施验收需办理的相关法定程序.docx
《大型游乐设施验收需办理的相关法定程序.docx》由会员分享,可在线阅读,更多相关《大型游乐设施验收需办理的相关法定程序.docx(28页珍藏版)》请在冰豆网上搜索。
大型游乐设施验收需办理的相关法定程序
程序一:
在签订设备合同前,卖
方负责将所销售设备的图纸及
技术资料提供给中国特种设备
检测研究院进行设计审核,经
审核合格,并取得《设计文件
鉴定报告》后,方可生产设备。
Phrase I:
Before signing the
Contract, the Seller shall provide
the drawings and technical
information of the ride to CSEI
for getting the “Design Approval
Report”, only with which the
Seller can manufacture this ride.
大型游乐设施设计文件鉴定所需
资料目录
Required Document List for Large
Amusement Rides Design Approval
(一)、设计说明书
(I) Design Description
1、设计方案
1. Design Concept
2、结构特点
2. Structure Features
3、工作原理
3. Working Principle
4、主要技术参数的选取
4. Selection of Main Technical
Parameters
5、主要设计依据(必要时应当有
地质勘察报告、气象资料及特殊使
用要求等)
5. Main Design Basis( ground
survey report, weather data and
special usage requirements etc
will be needed when necessary)
6、主要受力部件
6. Main Stressed Members
7、对制造、运输方面的特殊要求
等
7. Manufacturing and
Transportation Requirements
etc.
(二)相关的设计计算书
(II) Related Design Calculation
1、重要结构件强度、刚度计算
1. Intensity and Rigidity
Calculation for Main Structure
Components
2、主轴及重要销轴强度、刚度计
2. Intensity and Rigidity
Relevant Legal Procedures of Special Equipment Acceptance
大型游乐设施验收需办理的相关法定程序
算
Calculation for the Main Axles
and Important Pins
3、关键焊缝强度计算
3. Crucial Weld Strength
Calculation
4、机械传动系统计算(包括传动
件及电动机、减速机选择)
4. Mechanical Conveying System
Calculation (which includes
conveying elements and electric
motor and gearbox selection)
5、液压(气压)传动系统计算
5. Hydraulic (Pneumatic)
Conveying System Calculation
6、运动参数计算
6. Kinematical Parameter
Calculation
7、提供土建设计的受力参数等
7. Stressed Parameters for Civil
Design
(三)相关的图纸
(III) Related Drawings
1、图纸目录
1) Drawing catalog
2、总图及主要零部件图
2) General Drawings and Drawings
of Main Components
3、液压(气动)原理图等
3) Hydraulic (Pneumatic) Principle
Scheme,
(四)电气资料
(IV) Electric Documents
1、电气设计说明
1) Electric Design Description
2、电气系统计算(短路电流、电
机起动电压降等)
2) Electric System Calculation (
e.g. short circuit current,
starting voltage drop of the
electric motor)
3、控制程序图
3) Control Procedure Chart
4、流程图
4) Flow Chart
5、控制柜(操作箱)元件布置图
5) Control Cabinet (Control Box)
Component Layout
6、配备的主要电器元件的资料、
避雷和接地、平面图等
6) Documents, Anti-lightening and
Grounding and Plans etc for the
Main Electric Elements
(五)产品使用维修说明书
(VIII) Maintenance and Operation
Manual
1、设备概述及结构原理
1) Ride Outline and Structure
2
Principle
2、技术性能及参数
2) Technical Performance and
Parameters
3、常见故障及排除方法
3) Common Fault and Default List
4、安装及调试方法和要求
4) Installation and Commissioning
Method and Requirements
5、外购件(主要机电产品)的使用要
求
5) Usage Requirements on the
Bought-in Components (e.g.
main electromechanical
products)
6、整机及关键零部件的设计使用寿命
6) Designed Operational Life Span
for the Whole Ride and Crucial
Components
7、对操作维修人员的要求
7) Requirements on the
Maintenance and Operating
Staff
8、电气及液压(气动)原理图;日常
润滑部位等
8) Electric and Hydraulic
(Pneumatic) Principle Scheme;
Routine Lubrication Sites etc
(六)其它相关资料
(IX) Other Related Documents
1、建设行政主管部门认可的土建设计
审查通过的证明文件;
1) Civil Design documents
approved by Construction
Administrative Department
2、必需的零部件、材料检验试验报告;
2) Test Report of necessary parts
and materials
3、境外检验机构审查与检验报告;
3) Review and Test Report by
Inspection Institution abroad
4、设计鉴定机构所需的必要资料等
4) All necessary documents for
Design Review Institution
程序二:
签订合同后,卖方负责
向国家质检总局特种设备许可办
Phrase II:
After the Contract
signed, the Seller is responsible
公室申请首台设备型式试验备案。
to apply the first Machine Type
TestRecordfromSpecial
3
Equipment Office of CSEI.
进口机电产品(索道及游乐设施)
型式试验备案申请需递交如下资
料:
Necessary documents for
applying Type Test of imported
Mechanical and Electrical
Machine (for Ropeway and
Attractions)
1、中文版《特种设备制造许可申请书》
(编号:
TSZS001-2003) 4 份)及电子版文
件(即磁盘)。
1) “Application form for Special
Equipment Manufacturing” (code:
TSZS001-2003) 4 copies in
Chinese version and E-Version (
CD-ROM)
2.境外制造工厂签署的“声明”(中文),
主要内容包括:
境外制造工厂承诺在中国境内销售的
***产品遵守中国现行法规和安全技术
规范,并承担因违反中国现行法规、安
全技术规范所造成的一切后果。
境外制造工厂承诺为在中国境内使用
***产品的用户提供及时周到的支持和
服务。
境外制造工厂授权***公司在中国境内
办理型式试验备案相关手续,并承担相
关质量、安全和法律责任。
2) The Statement signed by Overseas
Manufacture, with contents as
following:
“The Overseas Manufacture
commits that its Ride products
sold in China are in conformity with
Chinese regulations and safety
technical specifications, and will
take the consequences caused due
to its violation of the regulations
and specifications mentioned
above.
The Overseas Manufacture will
provide our clients with good and
timely technical support and
service for amusement rides sold in
China, and will take all the
consequences caused by its
unqualified technical support and
service.
The Overseas Manufacture
hereby entrust (Authorized
Company) to handle the formalities
for type test record-filing,
application for installation of type
4
test ride sample, and will undertake
the related safety, quality
and legal consequences and
responsibilities.”
3.国内代理商营业执照和组织机构代码
证的复印件;
3) Copies of business license and
organization code of domestic
Agent
4.境外制造厂的商业注册文件和相关认
证证书的复印件。
4) Copies of Commerce registration
documents and related Certificates
of overseas Manufacture
5.申请产品的样本(图片)
5) Sample of applied product ( picture
)
6)卖方授权给买方代表卖方办理上述
程序 2,但是卖方将会提供买方所要求
的必须资料。
6) The seller entitles the Buyer to
proceed with PHASE II on behalf of
the Seller, but Seller shall provide
necessary documents to Buyer at
the request of the Buyer.
程序三:
卖方持已受理的《特种设备制
造许可申请书》约请型式试验机构进行
Phrase III:
With approved
型式试验(填写《游乐设施整机(部件) “SpecialEquipments
型式试验申请表》)。
程序四:
卖方向江西省质监局特
种机电设备处申请安装 1 台型式
试验样机。
Manufacture Application”, The
Seller shall invites Type Test
Institution fill the Equipment
whole ride (Parts Type Test
Application Form.
Phrase IV:
The Seller applies to
install the Type Equipment from
the Special Mechanic and
Electric Equipment Office of
5
申请样机批复需提交资料
Necessary documents for Type
Test Approval
1、《型式试验样机试安装申请报告》1 份
1. “Type Equipment installation
Application” one origin file
2、已受理的《特种设备制造许可申请书》
复印件 1 份
2. Approved “Special Equipments
Manufacture Application” one copy
3、中国特种设备检测研究院同意约请的
《游乐设施整机(部件)型式试验申请
表》
3. “Type Test Application Form for the
Whole Amusement Ride (or parts)”
approved by CSEI
4、制造或销售合同复印件 1 份
4. A copy of Manufacture Contract or
Sale Contract
5、申请单位《法人营业执照》复印件 1 份
5. A copy of “corporate business
license “of Applicant
6、申请单位《组织机构代码证》复印件 1
份
6. A copy of “Organization Code” of
Applicant
7、《特种设备安装改造维修许可证》复印
件 1 份
7. A copy of “Special Equipment
Installation/Modification License”
8、特种设备安装合同或安装委托书 1 份
(制造单位无安装资格时)
8. Origin of Special Equipment
Installation Contract or Authorized
letter of Installation (when the
Manufacture Company doesn’t
have the Installation License)
以上所有复印件需加盖申请单位
公章,申请时应同时提供原件核对
确认。
Applicant should apply Official
Stamp for all the copies of the
above documents, meanwhile
provide original documents for
verification.
GuangzhouQualityControl
Bureau.
6
程序五:
凭省局开出的《样机批
复函》,卖方委托安装公司到深圳
市市场监督管理局办理《安装告
知》。
Phrase V:
The Seller entrusts
Installation company to deal with
Installation Approval with replied
“Type Equipment Installation
Application” from Shenzhen
Quality Supervision Bureau.
安装告知所需资料:
Necessary documents for
Installation Approval
1、《九江市特种设备安装(改造、维修)告
知表》(原件 1 份);
1. An origin of “ Shenzhen Special
Equipments Installation (
Modification/Maintenance)
Application”
2、《特种设备安装改造维修许可证》(加盖
单位公章的复印件 1 份,验原件);
2. A copy of “Special Equipment
Installation/Modification License”
(with company stamp and origin
documents prepared)
3、施工人员特种设备作业人员证(加盖
单位公章的复印件 1 份,验原件);
3. Copy of Construction Operators’
License of Special Equipments
(with company stamp and origin
documents prepared)
4、使用单位机构代码证复印件 1 份;
4. A Copy of User’s Organization code
5、施工项目合同及日常维修保养合同
(加盖单位公章的复印件 1 份,验原件);
5. A copy of Construction Contract and
daily Maintenance Contract (with
company stamp and origin
documents prepared)
6、项目施工方案及其安全防护措施原
件 1 份;
6. An origin documents of Construction
Plan and Safety Measurements
7、国产设备:
产品合格证(加盖单位公章的复印件 1
份,验原件);
7. For Domestic Equipments needs:
A Copy of Product Quality
7
如果特种设备产品合格证上注明的使用
单位与告知的实际使用单位不同,应提
供由上述双方单位签署的产品委托订货
证明或转让证明(加盖双方单位公章的
复印件 1 份,验原件)
如制造厂的设备初次来九江或制造厂的
制造许可信息发生变更,窗口受理人员
可要求申报单位提供制造厂家加盖单位
公章的制造许可证、组织机构代码证和
营业执照复印件各 1 份;
Certificate ( with company stamp
and and original documents
prepared )
If the User in the Product Quality
Certificate is different from the User
in the Installation Approval, both
Users shall provide the copy of
signed Product Order Entrustment
or Product transferring Documents
(with both company’s Stamp and
origin documents prepared).
If it is the first time that the
Manufacture come to JIUJIANG or
there’s some change of the
Manufacture License, the officers
can require the company to provide
a copy of Manufacture License,
Organization Code and Business
License with company stamp.
8、境外生产设备:
大型游乐设施须提供型式试验报告(或
省局开出的样机批复函)和《大型游乐设
施设计文件鉴定报告》(原件各 1 份)。
注:
需进行设计文件鉴定的大型游乐设
施,见《大型游乐设施设计文件鉴定规则
(试行)》(国质检锅[2003]321 号));
8. For Overseas Manufacture:
Origin documents of Type Test
Report of Large-scale Special
Equipments (or Installation
Application Approval by Local
Province Bureau) .
Note:
If the Design Review for
Special Equipment is needed,
please obey the “Special
Equipments Design Review Rules
(trial implement)” (Chinese Quality
Control Bureau Documents No.
[2003]321.
8
9、如属设备移装的,还需提供下列材料:
a 设备在本市内移装的,使用单位需提
供移装申请(申请内容应注明其移装设
备注册号、原因及移装前后设备安装地
点)、设备出厂资料、首次验收检验报告
和定期检验报告。
使用单位发生变更的,
须先办理过户手续;
b 设备从市外移装到本市的,使用单位
除提供上述材料外,还应提供设备在原
注册地的注销证
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 大型 游乐 设施 验收 办理 相关 法定程序