ITA 70 安装与配置.docx
- 文档编号:26032634
- 上传时间:2023-06-17
- 格式:DOCX
- 页数:15
- 大小:505.71KB
ITA 70 安装与配置.docx
《ITA 70 安装与配置.docx》由会员分享,可在线阅读,更多相关《ITA 70 安装与配置.docx(15页珍藏版)》请在冰豆网上搜索。
ITA70安装与配置
InManagementNode
1.InstallSNMPprotocolform“add/removeprogram”.
2.InstallServerAdministrator.
3.Goto“controlplane/administrativetools/services”.SelectSNMPanddoubleclick.
ConfigureSNMPcommunity/trapasfollowing.Andthenrestarttheservice.
InManagementStation
1.InstallSNMPprotocolfrom“add/removeprogram”.
2.InstallDELLSystemManagementStation.MustselectITAduringinstallation.
3.LoginITAwithyourdomainadministratoraccount
4.ConfigureITASMTPproperty.
5.Addnewsearchrange.
Step1,addhostnameorIPaddressformanagementnodeandclicknext.Ifyouhavemultiplesystem,youcanenteraIPrange.
Step2,usedefaultfortimeoutsettingandclicknext.
Setp3,configureSNMPcommunityname,itshouldbethesameasyourmanagementnode.
Step4,usedefaultsettingforCIMsearchingandclicknext.
Step5,usedefaultsettingandclicknext.
Step6,clickfinish
6.Thenewrangewillappearinthe“searchrange”.Thenriggerasearchforthenewrange.
7.Monitorthesearchprocessandwaititcomplete.IfpreviousconfigurationisOK,youwillfindnewsystemondevicemenu.
8.Clicktoselectthesystem;youcancheckthe“SystemSummary/Alarm/ESMLog”.
ManagementTask
EmailAlarm
1.GotoAlarmmenu,configurenewalarmaction.
2.ConfigurenewactionasMailAlarm.
Step1,selecttheactiontype.
Step2,entermailboxandtestthesetting.
Step3,configureeventfilter.
Step4,selectthefilterandclicknext.
Step5,clickfinishandITAisreadytomonitoryoursystem.
Ifthesystemhasalarm,youwillreceiveaalarmmail.
WakeonLAN/Shutdownsystem
1.Selectmanagementtask.
2.Configurenewtask.
3.Selectsystemsyouwanttoapplytothistask.
4.Configurethetaskschedule.
5.Specifytheusertoperformtask
6.Clickfinish,thetaskwillbeissuedtotargetsystem.
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ITA 70 安装与配置 安装 配置