黄岛油库轻油栈桥设计.docx
- 文档编号:1477299
- 上传时间:2022-10-22
- 格式:DOCX
- 页数:56
- 大小:539.41KB
黄岛油库轻油栈桥设计.docx
《黄岛油库轻油栈桥设计.docx》由会员分享,可在线阅读,更多相关《黄岛油库轻油栈桥设计.docx(56页珍藏版)》请在冰豆网上搜索。
黄岛油库轻油栈桥设计
黄岛油库轻油栈桥设计
摘要
本设计是按给定油库生产操作量和油品运输方式,充分结合黄岛油库所处地理位置和自然条件的基础上,进行的油库常规设计。
按生产操作情况,火灾危险程度,经营管理特点等,根据油库设计规范将罐区、泵房、装卸区等分区布置,并设置相应的消防系统和保卫措施。
各区设置在满足安全距离的同时充分考虑了地理环境,留有一定的发展空间.以便安全生产,节约资源,降低成本。
黄岛油库每年火车进库97#和93#汽油分别为15.6万和18.7万吨,0#、5#柴油分别为10.6万吨和15.8万吨。
汽油全部由轮船外运,0#柴油由管道外运至某工厂,5#由90%汽车油槽车出库,其余10%装桶出库。
另外,油库每年还由油轮进燃料油和重柴油分别20.2万吨和15.6万吨,由输油管外运各12万吨,其余由汽车油槽车出库。
本设计由文字说明、数据计算和图纸绘制三大部分组成。
说明部分包括设计原始数据资料、总图布置说明、工艺流程说明、平面安装图说明以及人员编制等。
此外,还有对油库的概述和油库应采用的安全措施作了详细的介绍。
计算部分包括油罐设计容量的计算、装卸油设施的计算、管路的水力计算、选泵并校核、加热器面积计算以及油库消防计算。
绘图部分依据计算和各种规范以及经济因素,在最大限度满足生产要求的条件下,进行较为经济合理的布局,并为油库的扩建和发展留有余地。
关键词:
油库,罐区,输油管,工艺流程。
Huangdaooildepotlightoilpierdesign
Abstract
ThedesignisanormaloildepotdesignthatfullycombinestheHuangdaooildepotwelltheconditionalfoundationofageographypositionandnaturesup,aftergiventheproductionhomeworkquantityandtheconveyancemethod.Accordingtothemethodofproduction,dangerousdegreeoffireandmanagementcharacteristics,thencombinewithterminaldesignspecificationtomakethetankfarm,pumproom,terminalinPartitionlayout.Andsetupcorrespondingfirecontrolsystemandsecuritymeasures.Thearrangementofeveryareameetsthesafetydistance,andatthesametimefullycombineswiththegeographicalenvironment,thenleftsomecertainspacefordevelopment.Accordingthesafetyproduction,economyresources,declininglowcosttodesign.
Huangdaooildepotkeepinreserve97#and93#gasolineisrespectively156000and187000tonsbytraineachyear,0#and5#dieseloil106000and158000tonsrespectively.Allgasolinefeedoutbysteamship.0#dieseloilbypipelinetoacertainfactory,5#diesoilfeedout90%byautomobile,theremaining10%barreloutbound.Inaddition,theoildepotkeepinreserveheavydieseloilandfueloil202000and156000tonsbysteamshipeachyearrespectively,feedoutbypipelines120000tonseach,therestoutboundbyautomobile.
Thedesign,datacalculationsanddrawingsdrawnofthetextdescriptionarethreemajorcomponents.
Explainthepartincludestodesigntheoriginaldata,totaldiagramtoarrangetheelucidation,thecraftprocesselucidation,flatsurfacetoinstallthediagramtoexplainandthepersonneldrawup,inaddition,stillhadthesafemeasurethatsaysalltotheoildepotandshouldadoptwithoildepottomakethedetailedintroduction.
Computethecalculationthatthepartincludestheoilcande-signcapacity,packthecalculationofunloadtheoilfacilities,takecareofthewaterpowercalculationoftheroadandchoosethepumptocombinetheschoolpit,theheatingapparatusareacalculationandtheoildepotfirefightcalculations.Amongthecarriedonthedetailedcalculationtotheoilcanheatingapparatusarea.
Paintthepartaccordingtocalculationandvariousnormandeconomicfactories,undertheconditionofbiggestlimitsatisfiestheproductionrequest,carryonmoreeconomicsetupreasonability,andstayfortheextensionanddevelopmentsoftheoildepotenough.
Keyword:
Oildepot,Tankfarm,Oilpipeline,Processflow.
目录
前言………………………………………………………………………………………1
1、文字说明部分………………………………………………………………………3
1.1、基础数据………………………………………………………………………3
1.1.1、汽油和柴油参数………………………………………………………3
1.1.2、黄岛地区历年统计的自然条件………………………………………3
1.2、工程概况………………………………………………………………………4
1.2.1、油库综述………………………………………………………………4
1.2.2、油库的业务……………………………………………………………5
1.2.3、油库的分级和分区……………………………………………………5
1.3、油库操作说明…………………………………………………………………7
1.4、油库安全说明…………………………………………………………………8
1.4.1、防毒……………………………………………………………………9
1.4.2、防火防爆………………………………………………………………10
1.4.3、油库消防技术…………………………………………………………11
1.4.4、防雷……………………………………………………………………13
1.4.5、防静电…………………………………………………………………15
1.5、人员编制………………………………………………………………………16
1.6、工艺流程说明…………………………………………………………………17
1.6.1、制定工艺流程的原则………………………………………………17
1.6.2、黄岛油库作业内容……………………………………………………18
1.6.3、黄岛油库工艺流程……………………………………………………18
1.7、平面安装图说明………………………………………………………………18
1.8、平面总图布置说明……………………………………………………………19
2数据计算部分………………………………………………………………………21
2.1、基础计算………………………………………………………………………21
2.1.1、库容确定……………………………………………………………21
2.1.2、油罐数量的确定……………………………………………………23
2.1.3、各种油品铁路装卸油鹤管数的计算………………………………24
2.1.4、铁路装卸栈桥长度的计算…………………………………………25
2.1.5、汽车油罐车装油鹤管的计算………………………………………26
2.1.6、油品水运码头泊位数计算…………………………………………27
2.1.7、桶装作业灌油栓数目和油品仓库计算……………………………30
2.2、管路的水力计算………………………………………………………………31
2.2.1、粘度计算……………………………………………………………31
2.2.2、确定装卸油管径……………………………………………………32
2.2.3、沿程摩阻的计算……………………………………………………36
2.2.4、泵的选取……………………………………………………………40
2.2.5、泵的校核……………………………………………………………46
2.3、热力计算……………………………………………………………………48
2.3.1、油罐保温层厚度计算………………………………………………48
2.3.2、加热器面积的计算…………………………………………………48
2.4、辅助计算………………………………………………………………………53
2.4.1、计算泡沫耗量………………………………………………………53
2.4.2、一次灭火的泡沫液计算……………………………………………54
2.4.3、泡沫液储备量………………………………………………………55
2.4.4、消防用水的耗量……………………………………………………55
2.4.5、防火堤的计算………………………………………………………56
2.4.6、防洪沟的计算………………………………………………………59
参考文献………
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 油库 轻油 栈桥 设计
![提示](https://static.bdocx.com/images/bang_tan.gif)