晶片电阻器潜在失效模式及影响分析过程FMEAWord文档下载推荐.docx
- 文档编号:14304895
- 上传时间:2022-10-21
- 格式:DOCX
- 页数:387
- 大小:114.63KB
晶片电阻器潜在失效模式及影响分析过程FMEAWord文档下载推荐.docx
《晶片电阻器潜在失效模式及影响分析过程FMEAWord文档下载推荐.docx》由会员分享,可在线阅读,更多相关《晶片电阻器潜在失效模式及影响分析过程FMEAWord文档下载推荐.docx(387页珍藏版)》请在冰豆网上搜索。
偵測度(D)
控制預防ControlsPrevention
控制檢測ControlsDetection
P01物料收料RawmaterialReceiving
交貨數量正確Receivingquantitymustberight
數量不足Quantityisnotsufficient
到貨品數量短缺影響產線使用
Lackofreceivinggoodsquantityeffectproductionlineuse
5
收貨員未仔細清點Receivingclerk
doesn’tcheckitcarefully.
加強到貨清點及收貨人員業務能力培訓
Reinforcecheckingreceivinggoodsandtrainingreceivingclerk’sbusinessskills.
1
到貨清點後需復核清點Recheckaftercheckingreceivinggoods.
7
35
不能錯檢Can’twronginspection
量具
每日用標準片
Q01進料檢驗
部分不符合規
格的原物料流入產線造成報
準確度降低Thetestingjigisnotso
定期儀校
Regularlycalibration
做點檢
Dailycheckbyusingstandard
25
IQC/抽樣檢驗
廢
accurate
tablet.
原物料
IncominginspectionIQC/SamplingInspectrawmaterial
錯檢Wronginspection
Somerawmaterialwhichisnotmeetedthespecificationleakintoproductionlineandcausedscrap.
量測數據人為讀取或輸寫
錯誤
Operatorreadorinputwrong
自動化量測設備數據自動導出
Makethedataauto-download
Excel檔案建立數據異常的顯示功能
Makethedatalistwithabnormalalarm
3
15
data
function
P02貯藏作業
物料按區域儲
1.不良品與良
1.不良品可能
1.作業員未確
1.物料上架時
1.不良品倉單
管理
位等要求分別
品混放。
會當作良品發
認物料上標
100%Barcode掃描
獨設置並專人
Storged
放置,並應安全
Mixdefective
放現場生產。
籤。
儲位標籤和物料外
管理。
operation
management
儲存。
Materialsarestoredseparatelyaccordingtoarea,storage,etc.,andshould
materialwith
goodmaterial.
2.物料未按SOP要求安全放置和發放。
Materialsare
Defectivematerialmaybeissuedasgoodmaterialonsite.
2.可能造成物料的損毀。
Theoperatorhasnotidentifiedthelabelonthematerial.
2.作業員未按
箱標籤並上傳SAP
核對。
Whenthematerialisontheshelf,100%Barcodescansthestoragelabelandthematerialouter
Defectivegoodswarehousesetupseparatelyandmanagedbyspecialperson.
bestored
securely.
notsecurelyplacedand
Maycausematerial
規定放置物料
和FIFO作業。
boxlabelanduploadstheSAP
2.發料時
releasedas
damage.
Theoperator
check.
Barcode記錄存
requiredby
SOP
failstoplacematerialsand
2.明確標示儲位和
限高標籤,並做好人
2
檔。
Barcodescan
28
FIFO
operationsasrequired.
員物料安全培訓。
Clearlymarkedstoragelocationand
recordarchive.
3.定期盤點及
heightlimitlabel,
稽查。
and
Regular
Personnelmaterial
stocktakingand
safetytraining.
audit.
3.依據SAP做先進
先出(FIFO)管理
AcordingtotheSAP
firstinfirstout
(FIFO)management
P03發料管理
發料的準確性
1.發放錯誤的
1.導致現場生
1.作業員未按
1.100%Barcode掃
1.Barcode掃描
Release
(包括料號、數
物料上線。
產出不良品。
SOP規定做發
描物料標籤後上傳
記錄存檔。
material
量等)
Theaccuracyof
Issuewrongmaterialonline
Leadtotheproductionof
料作業。
SAP系統核對。
100%Barcode
Barcodescanrecordarchive.
thematerial
defective
failedtodothe
scanningmaterial
(including
2.發料數量錯
productsonsite.
materialwork
label,uploadSAP
2.定期盤點及
materialnumber,Qty,
誤。
Theamountof
2.現場無法完
成工單生產。
asrequiredbySOP.
systemcheck.2.雙方人員依據工
覈查。
etc)
materialsent
Theproduction
2.作業員清點
單進行數量清點核
outiswrong。
lineisunableto
completetheproduct
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 晶片 电阻器 潜在 失效 模式 影响 分析 过程 FMEA