控制计划程序文件Word下载.doc
- 文档编号:13425988
- 上传时间:2022-10-10
- 格式:DOC
- 页数:11
- 大小:960KB
控制计划程序文件Word下载.doc
《控制计划程序文件Word下载.doc》由会员分享,可在线阅读,更多相关《控制计划程序文件Word下载.doc(11页珍藏版)》请在冰豆网上搜索。
11/11
Department/部门
Controlplan控制计划
Author/作者
Ziehm
Date/日期
19.09.2008
Author/Verfasser:
Ziehm
Date/Datum:
29.9.06
1.Purposeandobjective
2.Processdefinitions
2.1Scope
2.2Processresponsibility
2.3Involvedfunctionaldivisions
2.4Definitions
2.5Measurables
3.0Procedure
3.1Controlplanforprototypes
3.2Controlplanforpre-launch
3.3Controlplanforproduction
3.4Productandprocesschanges,
relocationofproduction
3.5Archiving
4.Notesandremarks
5.Otherapplicabledocuments
1.目的
2.过程定义
2.1范围
2.2过程职责
2.3相关职能部门
2.4定义
2.5评价
3.0流程
3.1样件控制计划
3.2试生产控制计划
3.3生产控制计划
3.4产品和工艺变更,生产地的变更
3.5存档
4.备注和注释
5.其他适用文件
reviewed/复审
released/发布
from/从
date/signature
日期/签名
Duringproductandprocessdevelopment,everyindividualproductionstepforproductmanufacturemustbeplannedinsuchawaythat
Ø
adherencetoallspecifiedproductcharacteristicsisguaranteedusingcontrolled,economicalsequences.
allplannedproduction,assemblyandtestingsequencesforaproductfromreceiptoftheproductionmaterialsthroughtodeliveryofthefinishedproducttothecustomerarecollatedinaclearlymanageablelayoutintheformofacontrolplan.
changestodescribedproduction,assemblyandtestingsequencesareonlyintroducedfollowingpriorassessmentandapproval.
Thecontrolplanismaintainedasacontrolleddocumentthroughouttheentireproductionperiodandcanconsequentlybepresentedtothecustomer/toapprovalauthoritiesasaverificationdocumentasobjectiveevidenceofamethodicallyplannedandspecifiedproductionsequence.
1.目的
在产品和工艺发展阶段,产品制造的每一步生产步骤必须以下的方式进行计划:
确保所有规定的产品特性在生产过程中受控以及经济的。
一个产品从生产材料的验收到成品交货给顾客的整个过程的所有计划的生产、装配和检验的流程都要与控制计划中的清晰可实现的流程图对应。
产品描述,装配,检验的流程变更前一定要先评审、批准
控制计划是作为贯穿整个生产周期的受控文件,因此要提交给客户/批准,并作为一个有序的计划和规定的生产流程的有效文件验证证明。
2.0Processdefinitions
ThedefinitionscontainedinthisCentralQualityProcedureareapplicableworldwidetoallAutomotivedivisionsandfactories.(seeIMSVolume1_1.3OrganizationChapter1.3.2).
2.0过程定义
2.1范围
本中心质量程序囊括的定义适用于世界范围内所有Automotive的部门和工厂。
(见IMS1卷1.3章1.3.2节)。
2.2Processresponsibility/fieldsofresponsibility
Processresponsibilityforthecompilation,assessment,updating,releaseanddistributionofprototypecontrolplans(AandBsamples)lieswithDevelopment
Processresponsibilityforthecompilation,assessment,updating,releaseanddistributionofproductioncontrolplansforpre-launch(Csamples)andproduction(Dsamples)modelslieswiththeProductionPlanningDepartmentoftheproducingplant.
2.2过程职责或职责范围
开发部门在过程中负责样件控制计划的编写、评估、更新、发布和下发(A和B样品)。
为前期开发(C样品)和生产样品(D样品)编写评估、更新、发布和下发的样件控制计划,这些过程职责取决于制造工厂的生产计划部门。
Developmentdivisionswhichproduceandsupplysamplesorprototypesforcustomers(e.g.EEV,EEG,ELT)
ProductionPlanning
Logistics
QualityManagement
SupplierQualityAssurance
2.3相关职能部门
开发部门生产并向客户提供样品(如.EEV,EEG,ELT)
生产计划部门
物流部门
质量管理部门
供应商质量保证部门
Controlplan:
seeISO/TS16949chap.7.5.1.1andAnnexA
Productionmaterial:
Materialwhichisusedinthemanufactureofproducts.
Prototypes:
PrototypesareproductsmanufacturedundertheresponsibilityofDevelopmentandsuppliedtothecustomer.Parts,componentsandmanufacturingmethodsdonothavetocomplywiththesubsequentlyusedproductionprocess.QualityresponsibilitylieswiththedeliveringDevelopmentDepartment.
Pre-launchproducts:
Pre-launchproductsareproductsmanufacturedundertheresponsibilityofProductionPlanningfrompartsandcomponentswithdifferingreleasestatuses.Theproductionprocessesusedarestillintheoptimizationandreleasephase.Employeequalificationisnotyetcompleted.Qualityresponsibilitylieswiththeplant/QM
Seriesproducts:
SeriesproductsareproductsmanufacturedundertheresponsibilityofProductionmadefromreleasedpartsandcomponents.Theusedproductionprocessescomplywiththereleasedproductionstatus.ResponsibilityforqualitylieswithProduction.
Partgroups:
Thisdescribespartsofasimilarnaturewhicharemanufacturedusingidenticalprocesssteps,e.g.Duroplastreflectorproductionfordifferentheadlampsetc.
Productfamilies:
Thisdescribesdifferentvehiclemodel-relatedheadlamptypessuchasHalogen,right-handdriveversionorhalogenleft-handdriveversionforright-hand/left-handmountingrespectively.
Producthistory:
Thisisaproduct-specificdocumentationinwhichallmajorproductandprocesschangesarelis
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 控制 计划 程序 文件