GMSBIQ精益评估标准手册3内部资料.docx
- 文档编号:12030918
- 上传时间:2023-04-16
- 格式:DOCX
- 页数:22
- 大小:24.91KB
GMSBIQ精益评估标准手册3内部资料.docx
《GMSBIQ精益评估标准手册3内部资料.docx》由会员分享,可在线阅读,更多相关《GMSBIQ精益评估标准手册3内部资料.docx(22页珍藏版)》请在冰豆网上搜索。
GMSBIQ精益评估标准手册3内部资料
ElementName:
ProductQualityStandards
Definition:
Measurablerequirementsforproductcharacteristics,whichwhensatisfied,ensureourproductsmeetinternal/externalcustomerrequirements.
Purpose:
Toprovidecriteriaforproductevaluation.
要素名称:
产品质量标准
定义:
当客户满意时为确保我们的产品满足内部、外部客户的要求的产品特点的可测要求
目的:
为产品评估提供标准
BIQ-1
Adocumentedprocessisinplacetodevelop,approveandrevisetheproductqualitystandards.
LookforProductAssemblyDocuments(PAD's,ProcessSheets,EngineeringDataSheets,etc.),referencestoPAD'sandchangecontrolprocess.HowdoPADchangesgetcommunicatedandupdatedonthefloor?
BIQ-2
ProductQualityStandardsareclearlycommunicatedtotheuser/operatorattheworkplace.
LookforevidencethatQualityStandardswerecommunicatedtotheOperator.LookforBoundarySamples,visualcontrols,checksheets,etc.attheworkstation.Aretheyunderstood?
aretheretoolstomeasurethestandard?
Isthestandarddefinedandapplied?
BIQ-3
TheProductQualityStandardsareincorporatedintothestandardizedwork.
LookatStandardizedWorkSheets,fornecessarystandards.(BPP,IOM/IOS,KeyElement,CVIS,SOS,JES)
BIQ-4
Productqualitystandardsarecommonwithinplatforms.
EngineeringChangeProcessshouldbeinplaceandunderstood.(EngineeringChangeMeetingAgendaandminutes)
BIQ-5
Productqualitystandardsarenottighterthanthoseappliedinupstreamprocesses.
BIQ-1
有文件化的程序来制订、批准和修改产品质量标准。
查看产品装配文件(PAD、工艺卡片、工程数据单等),参考PAD更改控制程序。
怎样让现场知道并实施PAD更改
BIQ-2
产品质量标准要让现场使用者/操作工都清楚。
要查看质量标准已传递给操作工的证据。
要在工作现场查看边界样板、可视化控制、检查单等。
操作工理解这些东西吗?
他们有量具去测量这些标准吗?
标准是明确的和已执行的吗?
BIQ-3
将产品质量标准溶入标准化工作。
查看标准化工作单(BPP、IOM/IOS、关键要素、CVIS、SOS、JES)
BIQ-4
当发生工程更改时,要确保产品质量标准处于同一水平。
当要进行工程更改时,是否召开了评审会,并形成会议纪要;是否考虑了对同一系列车质量标准的影响?
BIQ-5
后工序的产品质量标准不能比前工序的产品质量标准更严格。
比较操作工位和检验工位的检验标准。
检验站的标准要比CARE线的标准更严。
Compareinspectioncriteriaforaspecificelementattheoperation,inspectionstation(ifapplicable),StandardsshouldbetighteratVerificationStationthanatCARE.
BIQ-6
Productqualitystandardsaredefinedandappliedateachstageoftheprocess.
LookforProductQualityStandardsineacharea(Body,Paint,Chassis,GA,etc.)ArethePQS'sincludedinthestandardizedworkdocumentationandaretheyunderstoodbytheoperator.
BIQ-7
ProductQualityStandardsaremeasureable.
Lookforboundrysamples,visualcontrols,visualaids,checksheets,etc.attheworkstation.Aretheyunderstood?
Aretheretoolstomeasurethestandard?
Arethestandardsdefinedandapplied?
BIQ-8
Productqualitystandardsmustsatisfycustomer(asdeterminedfromexternaldatasuchassurveys,clinics,etc.),engineeringandregulatoryrequirements.
Lookforaprocessthatreviewsexternaldataandmakesadjustmentsorcorrectiveactionsaccordingly(MOB,GloveBox,GDS,Warranty,J.D.Powers)
BIQ-9
Aformalprocessexiststofeedbacktoengineering,plantcapabilitytomeetqualitystandardsforfutureproductdevelopment.
TheCurrentProductImprovementProcess(CPIP)shouldbeinplaceandfunctioning.Lookformeetingtimesandagenda.
BIQ-6
质量标准要定义并应用于制造过程的各个阶段。
查看每个区域的质量标准(车身、涂装、总装车间等),产品质量标准已纳入标准化文件中并被操作工理解吗?
BIQ-7
产品质量标准是可测量的。
查看现场的边界样板、可视化控制、可视化辅助、检查单等。
操作工理解这些东西吗?
他们有量具去测量这些标准吗?
标准是明确的和已执行的吗?
BIQ-8
产品质量标准必须满足顾客需要(从外部调查、测评得到的数据而确定)和工程、调整要求。
查看是否使用了外部数据对产品质量标准进行了调整和改进。
BIQ-9
要有一套正是的程序来反馈工程能力和产能,以满足未来产品开发的质量标准。
查看现有产品的改进程序的实用性和有效性,以及产品改进会议的纪要。
ElementName:
ManufacturingProcessValidation
Definition:
Themethodbywhichprocessesarepreparedandvalidatedbeforestartingfullvolumeproduction.
Purpose:
Toensurethateachmanufacturingprocessiscapableofmeetingdefinedproductqualitystandards,whileachievingschedule.
要素名称:
制造程序验证
定义:
在批量生产前准备和验证程序的方法
目的:
在赶进度的同时,确保每一个制造程序能够达到要求的产品质量标准
BIQ-10
ErrorProofingisincorporatedinprocess/productdesignactivity.
Reviewoperationforerrorproofingdevices.IfErrorProofingwasinstalledaspartofthemanufacturingprocessaskiftheplanthadanyinvolvementwiththeManufacturingProcessTeam.IfErrorProofingwasnotpartoftheManufacturingProcessaskifErrorProofingwaspartofacorrectiveactivity(BIQ-38)
BIQ-11
FailureModeandEffectsAnalysismethodisusedinthedevelopmentofprocesses.(Minimumrequirement:
criticalprocesses)
Askwhathappensiftheoperatorputsthewrongpartonthevehicle.Isitpossibleandifsowhenisitfirstidentified.Wasfrontloadteamsinvolvedinearlydevelopmentofprocessesandarecountermeasuresinplaceiffailureoccurs.
BIQ-12
Processcontrolsareidentifiedandimplementedtocomplywithengineeringrequirements.(i.e.KeyCharacteristicDesignationSystem,ProcessControlPlans).
AskwhattheprocessisiftheoperatorortoolisunabletoperformaKeyProductCharacteristic(KPC)element.(DoestheoperatorutilizetheAndoncord?
)ThereshouldbeProcessControlPlansforeachtypeofKPC.ReviewseveralKPCoperationsandlookforprocesscontrolplans.TrytoensureunderstandingofKPCPlan
BIQ-10
将防错应用到过程/产品设计中。
检查制造过程中是否应用了防错;检查改进过程中是否应用了防错
BIQ-11
(PFMEA)失效模式及影响的分析要应用在过程的开发中(最低要求:
评审相关程序)。
询问是否操作工可能装上错误的零件?
如果装上了错误的零件何时能发现?
错误发生后是否有相应的对策?
(PFMEA)
BIQ-12
根据工程要求来鉴定和实施过程控制。
(例如关键特性分布系统、过程控制计划)
当操作者和工具无法执行KPC要素,程序如何运作?
每种KPC都应有过程控制计划。
相关员工是否理解KPC控制计划?
BIQ-13
ProcessesarevalidatedincaseofchangestoMan,Machine,Material,MethodandEnvironment(e.g.Conductstructuredworkstationreadinessprogram).
Askwhattheprocessisformakingandvalidatingchanges,explain.AsktoseechangeProcessControldocumentation.IstheYellowDotProcessused?
IsPFMEAapplied?
BIQ-14
ManufacturingValidationisconductedunderproductionconditions.
ReviewPTRprocesstoseeifTrialBuildswereconductedinfullproductionconditions.
BIQ-15
Countermeasuresareimplementedforproblemsidentifiedbeforenextbuildevent.SeeBIQ13
BIQ-16
Primaryandback-uptools,equipment,containersandmethodsarevalidatedpriortouse.
Theon-lineback-upequipmentshouldhaveaschedulefortestingandshouldbevisible.Back-uphandpowertoolsarevalidatedintoolcribandthisshouldbedocumented.(tag)
BIQ-17
ATotalProductiveMaintenance(TPM)Planisimplementedpriortosystemfill.WastheTMSplanutilizedduringthestartupprocess.
WasaProductionMaintenancePartnership(PMP)developedthatinvolvesproductionintheresponsibilityforqualityprocesses?
BIQ-13
改变人员、机器、物料、方法、环境(例如管理已有的固定化工作程序)时要进行过程验证。
检查过程变更的验证程序,检查过程变更控制文件。
使用了黄点流程和PFMEA吗?
BIQ-14
在生产条件下是否实施了制造确认。
评估PTR程序,看看在产品试制时是否考虑了批量生产需要。
BIQ-15
在下阶段制造开始前鉴定过的问题实施对策。
见BIQ-13
BIQ-16
各个阶段的工具、设备、工位器具和方式在使用前都要加以验证。
应制定备用设备的检查计划并目试化。
备用手动工具应放在工具箱中确认并记录结果
BIQ-17
在系统填充前要实施TPM计划。
涉及质量的生产过程都要有PMP。
ElementName:
InProcessControlandVerification
Definition:
Thesystemofbuildingqualityinstationthroughprevention,detection,andcontainmentofabnormalities.
Purpose:
TominimizeprocessvariationtoensurethatallproductsareOKinstationandareconfirmedassoonaspossiblefollowingmanufactureandtoreducewasteassociatedwithdefects.
要素名称:
过程控制与验证
定义:
通过预防、发现、牵制异常状况在岗位上建造质量的系统
目的:
时程序验证最少化,确保所有的产品在岗位上是合格的并尽快确定随后的制造,减少因缺陷造成的浪费
BIQ-18
Prevention-Standardizedworkisperformedineveryprocess(production,inspection,maintenance,etc.).
Lookforworkinstructions(SOS,ALBS,JESorIOM/IOSsheets)ateachoperation.Comparesheettoactualoperatormovement.
BIQ-19
Prevention-ATotalProductiveMaintenance(TPM)Planisimplemented.
Askiftheon-lineequipmentischecked/testedonaregularbasisbytheon-lineoperatoranditisdocumented.(PMPisusedinNorthAmerica.)
BIQ-20
Prevention-Adocumentedqualityplanisfollowed.
AsktheQualityManagertoreviewthePlantQualityPlan.Isitdocumented?
Isitunderstoodbytheorganization?
BIQ-21
Prevention-Onlypartsthatmeetdefinedstandardsaredeliveredtotheline.
Operatorworkinstructionsshouldincludehowtoidentifyandtohandlenon-conformingmaterial.(checkjobcertboard)Isthereareceivinginspectionprocess?
IstheMaterialDepartmentinvolvedincontainerizationissues?
BIQ-22
Prevention-Reviewsofkeyprocessequipmentareheldtoidentifyrequirementsforimprovement(e.g.,safety,torqueapplications,GlobalCustomerAudit,etc.).
BIQ-18
在每个过程(生产、检查、维修等)都贯测标准化工作。
在每个工位上查看SOS、ALBS、JES或IOM/IOS操作单以及工人是否按单操作。
BIQ-19
实施了TPM计划。
操作工是否定期检查了在线使用的设备并作了记录。
BIQ-20
文件化的零件质量计划要得以贯彻。
询问质量主管来评估车间质量计划。
是否文件化并被团队所理解?
BIQ-21
只有符合标准的零件能送到线旁。
操作者工作指导要写明如何鉴定和处理不合格物料。
有物料验收程序吗?
物料部门是否管理货柜运输问题?
BIQ-22
关键过程的设备要坚持检查和维护以满足不断提高的要求(例如安全、扭矩控制、GCA、)。
召开了专门会议来讨论这些问题吗?
谁参加?
使用了车间问题解决程序吗?
Aretherespecificmeetingsheldthatreviewtheseissues?
Whoattends?
IsthePlantproblemsolvingprocessused?
Follow-up?
BIQ-23
Prevention-Theeffectivenessofallprocessadjustments/correctiveactionsareverifiedoveraspecifiedperiodtoassureeffectiveness.(e.g.,afterTPM,calibration,machinemaintenance).
Lookfordocumentationthatwouldindicatechangesandvalidationofchange.Trendchartsshouldalsobeavailablethatwillindicatetheeffectivenessofthecorrectiveaction.
BIQ-24
Prevention-Requiredtooling,errorproofingdevices,gaugesandsafetyequipmentarestandardizedacrosstheplant.
Allofthisinformationshouldbedocumentedontheoperationcertificationboard.Visualverificationwilldetermineutilization.
BIQ-25
Prevention-Functionanduseoferrorproofingdevicesareverifiedonascheduledbasistomaintain,consistentrequiredfunctionality.AskifErrorProofingdevicesarecheckedonaspecifiedschedule.Lookforevidencethattheerrorproofingdeviceshavebeenvalidatedforproperfunction.
BIQ-26
Detection-RequiredQualitychecksareincludedinstandardizedwork
Lookforthisinformation
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- GMSBIQ 评估 标准 手册 内部 资料