电动机往复式压缩机技术规格书.docx
- 文档编号:10974446
- 上传时间:2023-02-24
- 格式:DOCX
- 页数:145
- 大小:147.44KB
电动机往复式压缩机技术规格书.docx
《电动机往复式压缩机技术规格书.docx》由会员分享,可在线阅读,更多相关《电动机往复式压缩机技术规格书.docx(145页珍藏版)》请在冰豆网上搜索。
电动机往复式压缩机技术规格书
技术规格书
文件号:
项目号:
版次:
A
中国石油天然气管道工程有限公司Corporation
ChinaPetroleumPipelineEngineering南堡油田1-3D平台气举阶段:
初设
采油地面工程030005-sj设计证书编号第页共97页1日期:
030005-kj勘察证书编号
SPECIFICATION
FOR
ELECTRICMOTORENGINEDRIVEN/RECIPROCATING
COMPRESSOR
编制
校对
核审
定审
准核
技术规格书
文件号:
项目号:
版次:
A
中国石油天然气管道工程有限公司Corporation
PipelineEngineeringChinaPetroleum南堡油田1-3D平台气举阶段:
初设
采油地面工程030005-sj设计证书编号第页共97页2日期:
030005-kj勘察证书编号
电动机/往复式压缩机技术规格书
编制
校对
核审
定审
准核
文件号:
技术规格书
中国石油天然气管道工程有限公司第页共97页3ChinaPetroleumPipelineEngineeringCorporation
PARTAGeneralDescriptionandRequirements.............................5
第一部分工程概况和要求.............................................................5
1GeneralDescriptionofProject......................................................5
1工程概况......................................................................................5
2GeneralDocumentRequirements...................................................5
2投标文件总体要求......................................................................5
PARTBVendorandproductExperience........................................8
8.........................................................第二部分供货商和产品业绩
..............................10.SpecificationsforCompressorUnitsPARTC
...................................................10压缩机组技术规格书第三部分
......................................................................................10.1General
......................................................................................10则1总
.........................................................................10.2ScopeofSupply
..................................................................................10.2供货范围
.........................................................143Codes,StandardsandUnits
....................................................................14标准、规范和单位3
...........................................................................18.4SiteConditions
..................................................................................18.现场条件4
5ReciprocatingCompressors.........................................................20
............................................................................205往复式压缩机
................................................................28.6ElectricMotorEngine
.......................................................................................286电动机
..................................................50.7InstrumentControlandElectric
.......................................................................50.控制仪表、电气7
文件号:
技术规格书
中国石油天然气管道工程有限公司第页共97页4ChinaPetroleumPipelineEngineeringCorporation
8PulsationandVibrationControl..................................................65
8脉动和振动控制.........................................................................65
9PressureVessels,Valves,ProcessgassystemandAuxiliaryItems.65
9压力容器、阀门、工艺气系统及辅件.......................................65
10Inspection,ShipmentRequirementandSiteAcceptance.............69
10检验、运输要求及现场验收....................................................69
11SparePartsandSpecialTools....................................................70
11备品备件及特殊工具................................................................70
12Guarantee.................................................................................71
12保证.........................................................................................71
13TechnicalDocumentRequirementforBid..................................76
13投标技术文件要求...................................................................76
14ProcessDesignBaseData.........................................................80
14设计基础数据..........................................................................80
15Attachment:
TableofComments,ClarificationsandExceptions
toTheSpecification..............................................................................88
15附录对本技术规格书的建议、澄清和偏离一览表...............88
附件1设计联络.........................................................................89
附件2脉动分析审查和工厂试验...............................................90
附件3设备监造.........................................................................91
附件4培训................................................................................92
附件5现场服务.........................................................................95
附件6现场验收.........................................................................96
文件号:
技术规格书
中国石油天然气管道工程有限公司第页共97页5ChinaPetroleumPipelineEngineeringCorporation
PARTAGeneralDescriptionandRequirements
第一部分工程概况和要求
1GeneralDescriptionofProject
1工程概况
1.1GeneralIntroductionofW-EGasTransmissionLiuzhuangUnderground
GasStorageProject
1.1西气东输地下储气库建设工程刘庄地下储气库简介
W-EGasTransmissionLiuzhuangUndergroundGasStorageProjectisthe
accessorialprojectofJi—NingPipelinewhichisonepartofW-EGas
TransmissionPipelineProject.Itsmainroleistoensurethedownstream
consumerofJi—NingPipelinecanusenaturalgassafelyandreposefully.The
43/dandtheperiodfirstis150×10extractionmcapabilityinjectionofthe
43/d.
10mcapabilityis240×西气东输地下储气库建设工程刘庄地下储气库是西气东输管道冀宁支线的配套工程。
其主要任务是确保为冀宁线下游用户安全平稳供气。
该工4343/d。
mm240×/d,采气规模为1010程一期注气规模为150×Thevendorshallsupply2electricmotorengine/reciprocatingcompressor
unitstofulfilltheinjectioncapability.
供货商应为本项目提供2套电动机驱动的往复式压缩机组。
2GeneralDocumentRequirements
2投标文件总体要求
2.1Allbiddingdocuments,materialsanddrawingsshallbeprovidedand
organizedinaccordancewiththeSpecifications,butnotlimitedasthese.
文件号:
技术规格书
中国石油天然气管道工程有限公司第页共97页6ChinaPetroleumPipelineEngineeringCorporation
2.1所有的投标文件和资料及图纸均应该按规格书要求进行编制和提供,但不限于此。
2.2Thegoverninglanguagesofappliedstandardsshallbeinitsoriginal
languages(thedefaultlanguageisenglish).
2.2所采用标准以该标准最原始制定国家的母语为准(默认的语言是英语)。
2.3Inbiddingdocuments,thecontentlist,thefirstandsecondlevelsofcontent
titlesshallbeinChineseandEnglish.
2.3所有投标技术文件目录和二级标题必须同时使用中文和英文。
2.4AllcalculationsanddisplayshallbeintheS.I.unit.Alldocuments,
drawings,instrumentdisplaypanelshallbedimensionedinS.I.units.
2.4所有计算和计算结果的表示都应该采用国际(SI)单位制。
所有文件、图纸及仪表显示盘均采用国际(SI)单位制。
2.5TheBuyerreservestherightstochangeunits'quantity,capacityand
technicalspecifications.Anychangesshallbeinformedtoallbiddersinwriting
beforeendofbidding.
2.5买方保留改变设备的数量、排量和技术要求的权利,所有变更在招标结束前以书面形式通知所有投标者。
2.6ThespecificationisbothinChineseandEnglish,incaseofconflict,the
Chineseversiongoverns.
2.6本技术规格书有中英文两种语言,如果发生冲突,以中文版本为准。
2.7Thevendorshallgivesupporttounits'maintenanceandoverhaul.
2.7供货商应对机组的维修及大修给予支持。
2.8AllmanufacturingplantsoftheVendorandthemajorSub-vendorsneedto
beISO9001certified.
文件号:
技术规格书
中国石油天然气管道工程有限公司第页共97页7ChinaPetroleumPipelineEngineeringCorporation
2.8所有主要设备的供货商及主要分包商的工厂均需获得ISO9001认证。
2.9Thevendorshallberesponseforqualityofthewholeunits.
2.9供货商应对机组的整体质量负责。
文件号:
技术规格书
中国石油天然气管道工程有限公司第页共97页8ChinaPetroleumPipelineEngineeringCorporation
PARTBVendorandproductExperience
第二部分供货商和产品业绩
1Thebiddersshallsubmitbriefintroduction,inChinese,ofthespecific
sub-companyordivisionorplantdirectlyresponsiblefortheprojectandthe
equipmentdesign,manufacture,delivery,servicesandsupport.
1投标者需使用中文呈报为本项目提供设计、制造、供货、提供售后服务和技术支持的具体部门和工厂的简介。
2Thebiddersshallsubmitbriefintroduction,inChinese,aboutthetechnology
andtheproductofrecommendedcompressorandengine.
2投标者需使用中文呈报所推荐的压缩机、电动机的技术和产品发展历史的简介。
3Thebiddersshallsubmit,inChinese,itsexperiencelistofproposed
compressorunitswithgeneraldatainSIunit.
3投标者需使用中文呈报所推荐的压缩机组在类似工程上的实际应用清单,同时用SI单位制提供主要参数。
4Theproposedcompressor/electricmotorenginecombinationshallbeproven
designandisfieldproven,thevendorisrequiredinstallationlistingofproposed
model(compressorandengine)thathavebeenprovidedinoilfieldorsimilar
locations.Vendorsshouldalsoprovidetheirtotalinstallationlisting.Thelisting
shallincludemodelnumber,operatingparameters,start-update,totalrunning
hours,installationaddress,andcontactnameoftheinstallationsforBuyer's
verification.
文件号:
技术规格书
中国石油天然气管道工程有限公司第页共97页9ChinaPetroleumPipelineEngineeringCorporation
4所提供的压缩机/电动机组合必须具备成熟可靠的设计使用经验。
供货商应提供该报价类型的压缩机及电动机在油气田或类似场所的使用业绩、橇装业绩,包括操作参数、投用日期、累计运行周期,和安装现场地址、电话号码等供买方审查。
5Thebiddersshallsubmit,inChinese,thehistoricandstatisticdataofoperation
hours,andMTBF(MeanTimeBetweenFailure)oftherecommendedgas
engine,provingitsreliabilityandlife.
5投标者应使用中文呈报所推荐的电动机的运行时间,故障周期的实际历史统计资料,以证实其可靠性和寿命的具体经验。
6Thebiddershallsubmitthereferenceofsingleunitsoperatingforatleast
25,000hours,toprovethemainpartsoverhaulperiodofunits,andtoprovethe
overhaulperiodofunits.
6投标者应提供单套机组至少25,000小时运行业绩以证明机组主要部件的大修周期和机组的大修周期。
7Vendorqualificat
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 电动机 往复 压缩机 技术 规格书